Mechanistic Insights into Surfactant-Modulated Electrode-Electrolyte Interface for Steering H2O2 Electrosynthesis.

Electrocatalytic reactions taking place at the electrified electrode-electrolyte interface involve processes of proton-coupled electron transfer. Interfacial protons are delivered to the electrode surface via a H2O-dominated hydrogen-bond network. Less efforts are made to regulate the interfacial proton transfer from the perspective of interfacial hydrogen-bond network. Here, we present quaternary ammonium salt cationic surfactants as electrolyte additives for enhancing the H2O2 selectivity of the oxygen reduction reaction (ORR). Through in situ vibrational spectroscopy and molecular dynamics calculation, it is revealed that the surfactants are irreversibly adsorbed on the electrode surface in response to a given bias potential range, leading to the weakening of the interfacial hydrogen-bond network. This decreases interfacial proton transfer kinetics, particularly at high bias potentials, thus suppressing the 4-electron ORR pathway and achieving a highly selective 2-electron pathway toward H2O2. These results highlight the opportunity for steering H2O-involved electrochemical reactions via modulating the interfacial hydrogen-bond network.

Rh-dispersed Cu nanowire catalyst for boosting electrocatalytic hydrogenation of 5-hydroxymethylfurfural.

Electrocatalytic conversion of biomass-derived 5-hydroxymethylfurfural (HMF) to 2,5-bis(hydroxymethyl)furan (BHMF) presents a compelling strategy for the production of premium chemicals via the utilization of renewable energy sources. Exploring efficient catalytic systems to obtain highly selective BHMF has remained a giant challenge. A design strategy is proposed here to regulate active hydrogen (Hads) production in rhodium (Rh) nanoparticles grown on Cu nanowires (RhCu NWs) catalyst, which achieves a faradaic efficiency (FE) of 92.6% in the electrocatalytic reduction of HMF to BHMF at -20 mA cm-2 with no degradation in performance after 8 cycles. Kinetic investigations and electron spin resonance (ESR) spectroscopy reveal that the incorporation of Rh accelerates the water dissociation and facilitates the generation of Hads. In situ attenuated total reflection surface enhanced infrared absorption spectroscopy (ATR-SEIRAS) further demonstrates that the Rh component boosts the proportion of ordered weakly hydrogen-bonded water molecules on the catalyst surface, which is much easier to dissociate. The construction of an interfacial Hads-rich environment promotes the HMF intermediates binding with Hads to BMHF, thereby suppressing the formation of undesired dimers. This work demonstrates the promise of altering the interfacial water environment as a strategy to boost the electrosynthetic properties of biomass-derived products toward value-added outcomes.

Boosting Hydrogen Peroxide Electrosynthesis via Modulating the Interfacial Hydrogen-Bond Environment.

Designing highly efficient and stable electrode-electrolyte interface for hydrogen peroxide (H2 O2 ) electrosynthesis remains challenging. Inhibiting the competitive side reaction, 4 e- oxygen reduction to H2 O, is essential for highly selective H2 O2 electrosynthesis. Instead of hindering excessive hydrogenation of H2 O2 via catalyst modification, we discover that adding a hydrogen-bond acceptor, dimethyl sulfoxide (DMSO), to the KOH electrolyte enables simultaneous improvement of the selectivity and activity of H2 O2 electrosynthesis. Spectral characterization and molecular simulation confirm that the formation of hydrogen bonds between DMSO and water molecules at the electrode-electrolyte interface can reduce the activity of water dissociation into active H* species. The suitable H* supply environment hinders excessive hydrogenation of the oxygen reduction reaction (ORR), thus improving the selectivity of 2 e- ORR and achieving over 90 % selectivity of H2 O2 . This work highlights the importance of regulating the interfacial hydrogen-bond environment by organic molecules as a means of boosting electrochemical performance in aqueous electrosynthesis and beyond.

Effect of Charge on Carbon Support on the Catalytic Activity of Cu2O toward CO2 Reduction to C2 Products.

Electrochemical carbon dioxide (CO2) reduction for C2 products has been studied on a series of supported Cu-based catalysts; however, the charge-promotion effects from the substrates for the selectivity of CO2 reduction are still unclear. Here we localize nanosized Cu2O on three carbon-based substrates that provide different charge-promotion effects: positively charged boron-doped graphene (BG), negatively charged nitrogen-doped graphene (NG), and weak negatively charged reduced graphene oxide (rGO). We demonstrate that the charge-promotion effects lead to an increase in faradaic efficiency (FE) for C2 products with an order of rGO/Cu < BG/Cu < pure Cu < NG/Cu and an FEC2/FEC1 ratio from 0.2 to 7.1. By performing in situ characterization, electrokinetic investigations, and density functional theory (DFT) calculations, we reveal that the negatively charged NG is favorable for stabilizing Cu+ species under CO2 reduction, which strengthens CO* adsorption to further boost C-C coupling for C2 products. As a result, we achieve a high C2+ FE of ∼68% at high current densities of 100-250 mA cm-2.

Dopant- and Surfactant-Tuned Electrode-Electrolyte Interface Enabling Efficient Alkynol Semi-Hydrogenation.

Electrochemical alkynol semi-hydrogenation has emerged as a sustainable and environmentally benign route for the production of high-value alkenols, featuring water as the hydrogen source instead of H2. It is highly challenging to design the electrode-electrolyte interface with efficient electrocatalysts and their matched electrolytes to break the selectivity-activity stereotype. Here, boron-doped Pd catalysts (PdB) and surfactant-modified interface are proposed to enable the simultaneous increase in alkenol selectivity and alkynol conversion. Typically, compared to pure Pd and commercial Pd/C catalysts, the PdB catalyst achieves both higher turnover frequency (139.8 h-1) and specific selectivity (above 90%) for the semi-hydrogenation of 2-methyl-3-butyn-2-ol (MBY). Quaternary ammonium cationic surfactants that are employed as electrolyte additives are assembled at the electrified interface in response to applied bias potential, establishing an interfacial microenvironment that can facilitate alkynol transfer and hinder water transfer suitably. Eventually the hydrogen evolution reaction is inhibited and alkynol semi-hydrogenation is promoted, without inducing the decrease of alkenol selectivity. This work offers a distinct perspective on creating a suitable electrode-electrolyte interface for electrosynthesis.

Dynamically Formed Surfactant Assembly at the Electrified Electrode-Electrolyte Interface Boosting CO2 Electroreduction.

Electrocatalytic reactions occur in the nanoscale space at the electrified electrode-electrolyte interface. It is well known that the electrode-electrolyte interface, also called as interfacial microenvironment, is difficult to investigate due to the interference of bulk electrolytes and its dynamic evolution in response to applied bias potential. Here, we employ electrochemical co-reduction of CO2 and H2O on commercial Ag electrodes as a model system, in conjunction with quaternary ammonium cationic surfactants as electrolyte additives. We probe bias-potential-driven dynamic response of the interfacial microenvironment as well as the mechanistic origin of catalytic selectivity. By virtue of comprehensive in situ vibrational spectroscopy, electrochemical impedance spectroscopy, and molecular dynamics simulations, it is revealed that the structure of surfactants is dynamically changed from a random distribution to a nearly ordered assembly with increasing bias potential. The nearly ordered surfactant assembly regulates the interfacial water environment by repelling isolated water and suppressing water orientation into an ordered structure as well as promotes CO2 enrichment at the electrified interface. Eventually, the formed hydrophobic-aerophilic interface microenvironment reduces the activity of water dissociation and increases the selectivity of CO2 electroreduction to CO. These results highlight the importance of regulating the interfacial microenvironment by organic additives as a means of boosting the electrochemical performance in electrosynthesis and beyond.

Toward High-Performance CO2 -to-C2 Electroreduction via Linker Tuning on MOF-Derived Catalysts.

Copper (Cu)-based metal-organic frameworks (MOFs) and MOF-derived catalysts are well studied for electroreduction of carbon dioxide (CO2 ); however, the effects of organic linkers for the selectivity of CO2 reduction are still unrevealed. Here, a series of Cu-based MOF-derived catalysts is investigated with different organic linkers appended, named X-Cu-BDC (BDC = 1,4-benzenedicarboxylic acid, X = NH2 , OH, H, F, and 2F). It is found that the linkers affect the faradaic efficiency (FE) for C2 products with an order of NH2  < OH < bare Cu-BDC < F < 2F, thus tuning the FEC2 :FEC1 ratios from 0.6 to 3.8. As a result, the highest C2 FE of ≈63% at a current density of 150 mA cm-2 on 2F-Cu-BDC derived catalyst is achieved. Using operando Raman measurements, it is revealed that the MOF derives to Cu2 O during eCO2 RR but organic linkers are stable. The fluorine group in organic linker can promote the H2 O dissociation to *H species, further facilitating the hydrogenation of *CO to *CHO that helps CC coupling.